Heating element for oil heating
25. - low loading W/cm2 500-12 500W
Description
- flange material: brass, steel, stainless steel 17 240/1.4301; 17 346/1.4401
- rod material: copper, steel, stainless steel 17 240/1.4301; 17 346/1.4401
- threaded, flange design, with inbuilt regulation TRG
Application
- hydraulics
- industrial control systems
- rail vehicles
- railway switches
Technical parameters
- power: 500-12 500W
- connection: threaded M48x2, G6/4", flange DIN 2501, EN 1092-1, ANSI B16,5, individual
- regulatory range/ T fuse: 0-40°C/55°C; 7-77°C/99°C; 20-127°C/150°C; 30-85°C/110°C; 50-150°C/180°C
- power supply 120, 230, 400, 480, 500V
- atypical adjustments: increased IP, inbuilt el. control, control by inbuilt thermostat, limit switches etc.
- individual rods length and shape adjustments
- PN: 0,6-6,4MPa
- protection: IP 54
Specification
Heating elements for oil heating are specially modified tube elements, that ensure, that there is no oil or similar heated liquid carbonization on the surface or the element.
Heating elements feature surface load within interval 1,4-2W/cm2, that guarantees sufficient and safe heat transfer. It is also possible to produce elements with individual ajdustments and lower/higher W/cm2loading requirements.
Commonly used materials for flanges are brass and nickel-plated steel, for heating rods carbon steel or stainless steel.
Power supply of the heating rods is optional and will be supplied according to customer requirements 110V, 230V, 400V, 480V, 500V, most commonly 1x230V or 1x400V (for single rod design) and 1x230V, 3x230V, 1x400 and 3x400V (for multi rod design).
Heating elements may be supplied with modifications according to customer requirements.
